.

The Cessna 182 produced by SKYARTEC

This news was published on Wednesday, June 13th, 2007 and is archived under Model Aviation.

The SKYARTEC CESSNA 182, produced by ourselves, is available both in ARF and RTF versions.The 4ch version is different from others. Our Cessna is equipped with 4 servos not 3 servos as common. The ARF version 4ch contains the 90% preassembled body, mounted motor, manual and decals except RX/TX set. The RTF version includes everything the beginner needs. Servos and steering levers are mounted and the airplane could be ready for flight within 20 minutes. We use EPS techniques for the airframe in order to achieve both smooth surface and best dynamic material properties. The model uses two servos mounted directly to the tail wing and roll rudders. The Cessna RTF version is 4ch also available in two versions, brushed and brushless.

Specifications

  • Wing span: 980mm
  • Length: 860mm
  • Weight: 560g
  • Motor: 480 gear drive or 1530KV BL Motor direct drive
  • Receiver,Speed controller[B/BL],4*Servros
  • Battery: 8.4V NIMH,1000 or 1800mAh 11.1V LIPO[BL]
  • Radio: 4CH, two servos for rol,front wheel steering
  • Frequency: 35/40/72 MHz all modes


Source: Skyartec
Pictures provided and copyrighted by Skyartec
For further information about Skyartec, click here

See more news in Model Aviation | | Mail to friend |


 
Advertise on Skycontrol